Volteq HY30005EP is a programmable DC power supply with built-in Arduino Micro controller. If you are familiar with Arduino, writing software code to control this power supply to run automatic testing is a piece of cake. We supply a sample code with rich set of features including ramping, amp-minute metering, remote sensing, active feedback control, etc. This power supply is ideally suited for computer controlled electrophoresis, automatic testing, battery charging/maintenance, DC/servo motors, anodizing and plating applications. We also provide up to 14 output/input pins for external data collection and control.
Key Features & Specifications:
- 4 Lines 20 characters LCD display
- Active feedback for more stable output
- Remote sensing
- Amp-minute metering and control
- Timer control
- Voltage ramp
- Automatic battery charger
- Digital Voltmeter
- Transient measurement
- 6 Groups of memories
- 4 Function keys (F1-F4) and 10 user definable keys (M1 - M10)
- Control: digital control via front panel or via USB
- Output enable and disable
- Two level of control for both current and voltage outputs: coarse and fine for ease of use
- Outputs: 0-300 V and 0-5 A
- Protection: over-voltage protection
- Input voltage: 110V AC and 220V AC switchable
- Voltage Stabilization: <=0.2%
- Current Stabilization: <=0.5%
- Load Regulation: <=0.3%
- Ripple noise: CV <= 1%
- Environment: 0-40C, relative humidity < 90%
- Warranty: 1 year
